| Author | Message | ||
     Denny_hahn Member Username: Denny_hahn Post Number: 197 Registered: 08-2004 |
We're having an abundance of false alarms because of the beam/smoke detectors. We just wanted to know if anyone else was having any of these issues and what was done to correct the situation. | ||
| Mark Kutzer New member Username: Mark_kutzer Post Number: 28 Registered: 10-2008 |
Denny, We have sprinklers and gas detection that will trip the alarms if activated. | ||
| Joe Rich New member Username: Joe_rich Post Number: 22 Registered: 12-2006 |
DENNY,WE HAVE A SPRINKLER SYSTEM AND SENSORS CONNECTED TO ALARM SYSTEM | ||
| Gary_williams Member Username: Gary_williams Post Number: 166 Registered: 08-2004 |
Denny, Our 1902 building only has smoke and heat sensors that are/were very sensitive. No sprinkler system. | ||
| Mark_mitchell Member Username: Mark_mitchell Post Number: 126 Registered: 08-2004 |
Denny, Our 1904 building has a sprinkler system only. Mark | ||
| Steve Myers Member Username: Steve_myers Post Number: 150 Registered: 08-2004 |
Denny, We have a sprinkler system in conjunction with smoke and heat detectors. We have not encountered any problem in the bus storage building. | ||
| Denny_hahn Member Username: Denny_hahn Post Number: 195 Registered: 08-2004 |
RVT would like to know what everyone is using for building fire supression in the bus parking areas? How many properties are using sprinklers? Those properties that are using a sprinkler system, is your system using anything in combination with the sprinkler? Smoke or fire beam detectors? The smoke beam detectors we're using seem to very sensitive. The smallest amount of dust or even the pressure washer exhaust sets off an alarm. |
